Visitors

©2019 by PT. Virence Optoelektronik Prima

Application Notes

December 23, 2018

Depends on your application and preference below are some key differences between Jetusolis and Jetue21a:

  • Jetusolis designed to give the most neutral natural CCT with minimal tint shifting (tightly lies near BBL). No greenish nor pinkish, just neutral.

  • Jetusoli...

September 6, 2018

Several things to consider when soldering LED/wires on VirEnce MCPCB. Due to it's unusually low thermal resistance, manual soldering can be challenging. Please follow below steps carefully.

LED reflow soldering:

The biggest problem for beginner is to keep the ultra thin...

August 2, 2018

*Please note that this guideline is based on my personal experiences dealing with various (mostly) Nichia LEDs.

What's your preferred CCT?

In general, there are two broad category for white LED: warm white and cool white. As for Nichia LEDs the warm white (1800K - 4500K)...

March 28, 2018

Without current balancing or current mirroring, driving LED strings in parallel is not a good options. This is because of the thermal runaway phenomenon inherent to LED's characteristic. LED is a diode and will only pass current at certain voltage (hence the terms forw...

January 30, 2018

A simple Excel sheet to help determine the resultant color temperature when several different E21A used.

Download here

Case study of mixing 2000K (sm203), 3000K (sm303), 4000K (sm403), and 5000K (sm503) with flux rank D160, D200, D220, and D220 in the same order. Th...

Please reload

0

MY CART